Skip to content
GoogleFacebookYelp
Book online or by phone, 24/7

LG Dryer Not Heating. Thermal Limiter And Vent Line Replacement in Camas

Repair time
1 hour
Type of work
Dryer Repair
Brand
LG
Location of client
Camas, 98607, WA

Brief description

The customer reported that the LG dryer was not heating. Dryers need steady exhaust airflow to carry hot, moist air out of the drum. A blocked vent usually holds heat inside until a safety cutoff opens the heating circuit to limit overheating. Damaged wiring or a failed heater can interrupt that circuit too, so a loss of heat calls for checking both the heating circuit and the exhaust path.

What We Did

We inspected the vent and found it extremely clogged along the line and at the end. The thermal limiter had popped because the temperature inside the dryer got too high. We replaced it and the damaged wiring harness, then replaced the vent line and cleaned the end cap. Replacing the blocked line addressed the restriction rather than leaving it in place with a new safety part. Damaged wiring should be replaced rather than left in a circuit that gets hot during normal use. We tested the dryer after the repair. For this kind of fault, a homeowner can clean the lint screen and check the accessible vent outlet for buildup with the dryer off. If the dryer overheats again, stop using it and have the vent and safety controls checked.

Dryer Problems We Fix in Camas

We repaired this LG dryer in Camas, WA. These are the dryer problems we repair. A symptom that is not listed still gets a full test of the dryer.

  • Gets very hot
  • Takes too long to dry
  • Electric dryer trips the breaker
  • Burning smell
  • Squealing or squeaking
  • Will not start
  • Runs but does not heat
  • Cycle will not advance or end

Prices and booking are on our Vancouver dryer repair page. You can also look through other dryer jobs our team finished in Vancouver, WA.

Our Dryer Repair Process

  1. Book a Time

    Choose an open 2-hour arrival window online or call the Vancouver team. Tell us the brand, the model if you have it, and what the dryer is doing, so the technician comes with the right parts.

  2. Diagnosis and Written Estimate

    The technician tests the dryer and explains what failed. You get a written estimate on the spot that lists parts and labor.

  3. You Decide

    No repair starts until you approve the estimate. Approve it and the diagnostic fee is waived; decline it and you pay only the diagnostic. If the repair would cost more than about half the price of a comparable new dryer, the technician tells you first.

  4. Repair and Warranty

    If the technician has the part on hand, the repair usually happens on the same visit. If it has to be ordered, you pick the return time. Pay by card, cash, check or tap. Repairs are covered by a warranty of up to 1 year, depending on the work.

Do you want diagnostics?

Get special discounts by booking your appliance repair service directly on our site. It's a smart way to save while fixing your appliances!

Book Online
Vancouver, WA team(564) 333-0673Mon–Fri 8am–6pmBook OnlineServicesPricesPortfolioGoogle profile
CallBook Online